ZCG N Type Connectors (For ½”, ⅞” & 1 ¼” cables) Details
N type for ½”, ⅞” and 1 ¼” cables
SRK only uses high quality N type and DIN7/16 connectors for the antenna port of its products, though other connector types are available upon request.
N type connectors are suitable for powers up to 500W in the FM or NAS bands. For powers greater than 500W or where lower levels of inter-modulation products are required, DIN7/16 connectors are used.
We can provide a range of connectors to mate with our equipment and associated antennas.
A connector must be suitable for the intended coaxial cable and can be either solder/clamp assembled or crimp assembled. Solder/clamp connectors require no special tooling, but are harder and slower to assemble in the field. Crimp connectors require special crimping tools but can be assembled in the field more efficiently. Both types are equally reliable, if assembled and installed correctly.
We generally advise that when ordering connectors and their associated cables, the connectors should be pre-fitted in our factory. We have found that this avoids many future field problems associated with poor antenna connection.